You have to be precise before installing a vinyl fence because vinyl is not as easy to install as wood. If your measurements are a bit off the mark, you can trim the top of the wooden fence posts, but you can't do it with vinyl.
Heat and cold can cause vinyl rods to move and warp. Make sure you have all the relevant information before you hire an installer or undertake this type of project yourself. You can look at this web-site to find more information about fences.
Image Source: Google
If you live in a cooler climate where freezing is a problem then you need to take that into account rather than when installing. The fence post openings should be wider at the bottom than at the top, and the fence posts must be below the freezing line. These two steps are often overlooked. If these two things don't happen in freezing weather, it can actually lift your fence off the ground.
Just because the fence is vinyl doesn't mean you have to get to the bottom of the hardware. Vinyl fences ward off the elements. So make sure your hardware does the same. Stainless steel fixtures are the best way to go. The investment is very valuable.
Vinyl fences need a place to move. It will expand and shrink over time. Cannot be attached too tightly or squeezed. This must be taken into account when installing vinyl fencing. If not, you'll have to delete it and start over. Even worse, you may have to replace some parts, which will cost you more money.